From coordinated power-down to certified disposal — vetted teams execute decommissioning programs with serialized chain of custody and a complete documentation package, across the U.S., Brazil, and Latin America.
Or call us: +1 (321) 947-2184
Global Projects
U.S. States
Field Professionals (Americas)
Support
Also trusted by Tier-1 hyperscalers, global carriers, and colocation operators across the Americas — client identities subject to confidentiality agreements.
Decommissioning is the controlled retirement of infrastructure: power-down coordinated with the operator’s change window, de-cabling, de-racking, physical removal, and site restoration. Certified destruction is what happens to data-bearing assets afterward: media sanitized or rendered unrecoverable, with a certificate issued per asset and a chain-of-custody record from the rack to final disposition. Most programs need both — and the risk sits in the handoff between them. Hype Telecom coordinates the full sequence under one team and one documentation standard.

Every asset is identified by serial number at de-rack and tracked through packaging, transport, sanitization, and final disposition. Photos are captured at each handoff. The client receives a single package that closes the audit trail — no reconciliation work left on their side.
Decommissioning fails in the gaps between steps, so we run it as one sequence with a named owner for each handoff. The typical order is:
The step we see skipped most often is step 1. When the asset list comes straight from a CMDB that hasn’t been audited, drives go missing on paper even when they never left the building. We’d rather spend an extra day reconciling than explain a gap in a certificate later. Our article on chain of custody in hardware decommissioning explains where custody usually breaks.
The right method depends on the media type and on whether the device will be reused. This table shows the typical options we agree with clients. Your internal policy or regulator may be stricter.
Media type | Typical method when reused | Typical method when retired | Evidence you receive |
|---|---|---|---|
Hard disk drives (HDD) | Overwrite (clear) or purge with verification | Physical destruction (shredding or crushing) | Serial-level certificate, verification record |
Solid state drives and NVMe | Cryptographic or block erase (purge) using manufacturer-supported commands | Shredding or disintegration to small particle size | Serial-level certificate, erase log |
Backup tape | Not usually reused | Degaussing and/or physical destruction | Lot or serial-level certificate |
Network gear with onboard storage | Configuration wipe and factory reset, verified | Removal and destruction of the storage component | Device list with method per item |
Optics and cabling | Reuse after inspection | Recycling through certified facility | Certificate of recycling |
A certificate is only as good as the detail on it. Ask for serial numbers, method, date, location and the name of the person or facility that performed the work. Our guide to the certificate of destruction lists the fields to require.
Hype Telecom manages the field work and the custody trail. For final destruction and recycling, we work with downstream facilities certified to R2v3 or e-Stewards, chosen to match your policy and the site’s jurisdiction. If your team is still deciding which standard to require, our comparison of R2v3 vs. e-Stewards covers the practical differences.
Documentation is prepared so one package can support U.S. state privacy requirements and LGPD in Brazil. We don’t give legal advice, but we will map each document to the control your compliance team needs to evidence.
Specific client identities are subject to confidentiality agreements and available upon request.
Proven delivery across 22+ U.S. states with nationwide coverage; nationwide coverage in Brazil; established operations in Argentina, Brazil, Chile, Colombia, and Mexico — one coordination structure and one documentation standard across the Americas.
Yes. Certificates are issued per asset by our certified destruction partners, referenced to the serial log, and included in the final documentation package that Hype Telecom delivers and coordinates end to end.
Yes. Media is sanitized in line with NIST SP 800-88 guidelines before redeployment or destruction, and the method applied is recorded per asset.
Yes. When equipment is moving rather than retiring, the same team handles power-down, removal, secure transport, and re-installation with documented handover.
Power-down and removal are scheduled inside the operator’s change window, with confirmation before start and at completion, and all access requirements handled before the program begins.
Hype Telecom handles the field work, sanitization and chain of custody, and works with downstream facilities that are R2v3- or e-Stewards-certified for final destruction and recycling. We choose the facility to match your policy and jurisdiction, and the certificate you receive names the facility that performed the work.
Often, yes. On-site destruction is common when policy says data-bearing media cannot leave the building intact. It depends on the site’s rules for equipment and noise and on the partner facility that provides the shredder. Where on-site destruction isn’t practical, drives travel sealed and scanned under chain of custody and are destroyed at the certified facility.
For SSDs that will be reused, a manufacturer-supported cryptographic erase or block erase (purge) is the usual choice, followed by verification. Overwriting tools designed for spinning disks are not reliable on flash media. For SSDs that are being retired, physical destruction to a small particle size is the common choice. Your security policy should set the final rule.
It depends on the number of racks, how accurate the asset records are, access hours, whether destruction happens on site and how the work is sequenced with any migration. A single-room refresh is very different from a full site exit. We give a timeline after the scoping walk, once the inventory has been reconciled.
Talk to our team about scope, sites, and timelines. The assessment is free. The conversation takes 30 minutes.
Expanding across the U.S., Brazil, or LATAM? Our team accelerates your global connectivity and knowledge delivery.
Headquartered in the USA with operations across Brazil and LATAM, Hype Telecom delivers seamless cross-border connectivity, enabling the flow of knowledge and data at scale—anywhere it’s needed.
Your privacy choices
We use cookies to run this site, measure traffic, and support our advertising on LinkedIn, Meta, and Google. You can accept all cookies, reject the non-essential ones, or choose by category. Privacy Policy